Cell:+603 7987 3188
Email: info@micro-optics.com.my

Please Contact Us
* indicates required

Top Tech Machines Co Ltd

TOP-TECH-logo
 
About Top Tech Machines Co., Ltd.
 
Established in 1995, TOP TECH operates on four management principles: Quality, Speed, Innovation and Responsibility. TOP TECH continues to be devoted to innovation and R&D, and their growing staff has many years of experience in design and manufacturing. From the rich experience. TOP TECH has developed equipment that combines the highest levels of preparation quality with outstanding user-friendliness. The machines incorporate a number of revolutionary patented features, and are sold throughout the world.
 
Some Products of Top Tech
 
CL50C_OPEN 570X600 backoff shadowCL50C Sample Cutting System
The CL50C Sample cutting system is design for cutting the specific area that is to be mounted and tested. The item to be cut can be easily mounted on a clamp in the system. The sample can then be cut by the abrasive cutter into sample that can be mounted, grinded and polished later.
TOPTECH_MV02_Vacuum_Mounting_MachineMV02 Vacuum Sample Mounting Machine
While a sample resin is mounted and begin to set, there may be air bubble trap inside the cured sample. The MV02 system will apply an effective vacuum during the resin setting process and effectively reducing this and thus improving the quality of mount.
Top Tech ML-C Hot Mount PressML-C Hot Mounting Press
The ML-C series is a virtually quiet range of hot mounting presses operating below 62 decibels. It is suitable for a samples ranging from 25mm to 50mm. It is fully automatic for pressurising, heating and cooling. User-friendly program information is shown on the large touch screen.
Top_Tech_E-F_Grinding_Polishing_MachineE series Manual Grinding Polishing Machine
Top Tech E-F manual grinder polishers are ideal for smaller labs where either there is small throughput of samples, or where samples vary in size and shape. The system offer dual direction platen rotation to ensure even grinding and polishing and variable speed control from 50 to 600rpm.
Top_Tech_FS_FRS_automatic_grinding_and_polishingE series Automatic Grinding Polishing
The next level of automation in preparation is the FRS-A and FRS-C grinding polishing machine. Based on single or twin bases these spring loaded heads enable either single sample preparation or sample holder preparation. These solutions are perfect for consistency in preparation. The motorised heads mean that all of the modern consumables that are now available can be utilised
Top_Tech_CF250A_Cutting_MachineCF250A 12″ Abrasive Cutter
The latest 12″ Abrasive Cutter from TopTech is the CF250A. The CF250A has been modified so that the cut off machine now incorporates Z axis cutting as well as our usual Y direction
The lighting is now internal LED lighting and the sides have been made to allow through cutting options if required.
Top_Tech_CK200B_Abrasive_CutterCK200B 10″ Abrasive Cutter
The CK200 has been modified so that the cut off machine now incorporates T-slot beds for multiple vice options. The lighting is now internal LED lighting and the sides have been opened up to let more light in. They have a cutting depth of 200mm. The magnetic cleaning spray gun stores in any location.
Top_Tech_CK360B_abrasive_cutterCK260B/360B/460B 12 -16″ Abrasive Cutter
CK260B, CK360B & CK460B represent newer updates of our freestanding abrasive cutters. The CK260B being a 12″ machine and the CK360B either 12″ or upto to 16″ and the CK460B being a 16″ machine. All machines take the same basic design but obviously motor and capacities vary depending on the machine. All cutters have been modified so that the cut off machine now incorporates T-slot beds for multiple vice options.
TopTech-CL50_cutting_machineCL50 Abrasive Cutter
The CL50 is a higher speed bench mounted diamond cut-off machine compared to the CL40. The CL50 increases the capacity from the CL40. It uses 5″ to 7″ cutting discs (125-175mm). Has variable speed wheel control from 150-2000 rpm.
Top_Tech_CL50C_Abrasive_CutterCL50C Abrasive Cutter
The new desktop manual wet abrasive cut-off machine has been developed by TopTech for general purpose metallography. The bench mounted manual wet abrasive cut-off machines are designed for general purpose metallurgical cutting. Machines are available in 250mm or 300mm versions
Top_Tech_CL100_Cutting_MachineCL100A Abrasive Cutter
The CL100A is the most versatile and powerful of the range. It is an automatic cutter with touch-panel control with a programmable function. It enables easy and quick positioning of samples for sectioning. It can cut in two directions with variable speed control. It has a large cutting capacity using either an abrasive cut-off disc, or a diamond wafering blade.
Top_Tech_CL100_Cutting_MachineCL80A Abrasive Cutter
The CL80A is the 12″ Wet Abrasive Cut Off Machine. It is an automatic cutter with touchpanel control with a programmable function. It enables easy and quick positioning of samples for sectioning. It can cut in two directions with variable speed control. Variable Speed motor with 100L Coolant Tank. It has a large cutting capacity using either an abrasive cut-off disc, or a diamond wafering blade.
Top_Tech_CL60A_Abrasive_CutterCL60A Abrasive Cutter
The Preciso-CL60A is the 10″ Wet Abrasive Cut Off Machine. It is an automatic cutter with touchpanel control with a programmable function. It enables easy and quick positioning of samples for sectioning. It can cut in two directions with variable speed control. Both vertical and horizontal cutting. Uses a 100L coolant tank essential for cool cutting. It has a large cutting capacity using either an abrasive cut-off disc, or a diamond wafering blade.
Top_Tech_ML-L_Hot_Press_MountML-L Hot Mounting Press
The ML-L series is a virtually silent range of hot mounting presses operating below 48 decibels. It is suitable for a samples ranging from 25mm to 50mm. It is fully automatic for pressurising, heating and cooling. User-friendly program information is shown on the colour LCD touch screen. The single sample mounting press produces one sample at a time. The dual version allows a doubling of this capacity.

OUR PHILOSOPHY

” Always go the extra mile for you” –  this is our way of life. We don’t just say it. We live by it and show you by our action! Although we may not solve all your problems all the time, we will always go the extra mile to help you!

RIGHT SYSTEM FOR THE RIGHT APPLICATION

Before order is placed, the application of the customer is discussed in detail. Base on our vast experience in various industries, we will offer the best and most cost effective solution for that application of the customer.

ON TIME DELIVERY WITH BEST QUALITY ASSURED

Complex instruments delivery may some times be long. However, we strive to ensure that we deliver the systems on time every time and with the utmost quality of the product assured!

GREAT AFTER SALES AND SERVICE

From installation to user application training to after sales services and support. We strive to ensure that every part of this is done by the best qualified engineers in a timely and professional way.